plane bearing
英 [pleɪn ˈbeərɪŋ]
美 [pleɪn ˈberɪŋ]
网络 滑动轴承
双语例句
- The finish machining of the bisect plane of bisect sliding bearing is the key working procedure of the machining process of such products.
对开滑动轴承的对接平面精加工是该类产品工艺流程的关键工序。 - The finite element analys of press field of static pressure plane air bearing
静压式平面空气轴承压力场的有限元分析 - Experimental Research on out of Plane Eccentric Compressive Bearing Capacity of Reinforced Block Masonry Shear Walls
配筋砌块砌体剪力墙平面外偏心受压承载能力试验研究 - Based on the theory of multiplayer axisymmetric plane strain model, a method is proposed to calculate the fracture strength of concrete during normal service stage. A design formula is also given to calculate the ultimate bearing capacity of prestressed concrete penstock.
结合多层圆筒轴对称平面形变计算理论，提出了预应力混凝土压力管道运行阶段抗裂性能的验算方法，同时给出了预应力混凝土压力管道极限承载能力计算公式。 - It is known that in plane finite element calculation the bearing load must be transformed into force of nodal.
在平面有限元计算中，必须把轴承负荷转为节点力。 - Application of Boundary Element Method in Calculation of Pressure Field of Plane Air Bearing
边界元法在平面空气轴承压力场计算中的应用 - Study on Plane Deformation in Curved Girder Bridge and Positioning of Its Bearing System
曲线梁桥平面变形特性和支承布置的研究 - Control system of broaching machine for bisect plane machining of sliding bearing based on PLC
基于PLC的滑动轴承对接平面拉床控制系统 - Finally. the plane air bearing pressure field is calculated with this model and compared with finite difference method.
最后，用该模型计算了平面空气轴承的压力场，并与有限差分法进行了比较。 - Pressure-following Oil Supply Characteristics of Cave Plane Hydrostatic Thrust Bearing
腔式平面静压推力轴承的压力跟踪供油特性 - On the basis of spherical surface to plane contact problem analysis, the complicated contact problems in the hybrid ceramic ball bearing are investigated.
在球面-平面接触问题分析的基础上，借鉴其有限元模型简化及边界条件，以推力型球轴承为例，对较复杂的球面-曲面接触问题进行了分析。 - On the basis of the optimization of the plane location in fault block, the vertical position in oil bearing formation and the horizontal interval length for the horizontal well, cluster horizontal wells are designed for Yong 8 fault block.
在优选水平井在断块平面和油层纵向的位置、水平段长度等基础上，设计并实施了永8X4块的一个丛式水平井组。 - Bearing plane uses MPLS technology, with bandwidth pre-planned, to meet the needs requiring QoS, and user access control and traffic control are also completed in the access layer of the bearing network.
承载面使用MPLS技术，进行带宽预规划，满足需要QoS的业务，并在接入层完成对用户接入及流量的各种控制功能。 - Thirdly, as one of oblique plane primary enveloping worm drive, which has more meshing tooth pairs, it has high contact ratio leads to strong bearing capability, which near to plane double enveloping worm drive.
第三它作为斜平面一次包络蜗杆传动中的一种，啮合齿对较多，因此啮合重合度高，传动副承载能力强，承载能力仅次于平面二次包络蜗杆传动而强于圆柱蜗杆传动； - When milling horizontally middle plane, by applying milling force to bearing end and steam guidance end, simulation results showed no excessive deformation arose.
对于铣削力引起的加工变形，在加工水平中分面时，将铣削力分别施加到轴承端和导流端，仿真结果显示，铣削力不会引起过大变形； - Influence factors of reinforced block masonry shear walls bearing capacity out of plane are discussed, which can provide reference for the calculation of bearing capacity on reinforced block masonry shear wall structure.
探讨了配筋砌体剪力墙平面外竖向承载力的影响因素，为建立承载力计算方法提供了依据。 - The calculation of inner force of pile caps establish on the bending theories of beam and plane, the checking computation of load bearing capacity for pile caps generally used calculation method of beam and plane.
传统桩基承台的内力计算都是建立在梁、板受弯计算理论基础之上，对承台的受剪、受冲切、局部受压承载力的验算基本套用一般梁、板等受弯构件的计算方法。 - Plane linkage element is used to calculate bearing capacity of the structure, and 3D solid element is used to simulate response of the beam to load.
采用平面杆系单元进行结构的承载力检算，采用3D实体单元进行梁体荷载响应模拟。 - To balance the enormous tensile stress in the cable-tower anchorage due to cables, some plane pre-stressing tendons are arranged within the tower walls for the pre-pressure of anchorage areas in order to prevent section cracking and enhance its cross-section bearing potential.
为了平衡拉索在索塔锚固区内产生的巨大拉应力，通常在塔柱四壁内布置平面预应力筋，对锚固区进行预压，以防止截面开裂并提高其承载潜力。 - On this condition, analyze different upper air floatation plane angle of dovetail guide way bearing loading capacity. Finally determine the structure and technological parameters of guide way and the engineering drawing.
在此基础上，对不同上侧气浮面夹角的燕尾形导轨承载力进行分析，最终确定各导轨面的结构和工艺参数并出工程图。 - Prandtl-Vesic of ultimate bearing capacity of strip foundation belongs to the plane strain problems, which adopt step superposition method to obtain the formula of ultimate bearing capacity.
勃郎特-维西克研究的条形基础极限承载力属于平面应变问题，采用分步叠加法，求得地基极限承载力公式。 - For the joint in the plane frame, the thickness of the column flange has big influences on the dint and distortion to the joint. The thicker the column flange is, the higher the extreme bearing capacity is, and the both nearly assume the linear relations.
对于平面框架中节点，柱翼板厚度对节点受力和变形影响很大，柱翼板越厚，节点极限承载力越高，并且二者几乎呈线性关系。 - Many members in industry can be treated as plane problems when bearing or deforming, such as beam, thus plane problem plays an important role in traditional research.
工程中的许多结构在承载和变形过程中都可以归结为平面构件问题，如梁等，因此平面问题是十分重要的。